placestats

Aggregate travel time to work and Robbery rate

Where Aggregate travel time to work is higher, Robbery rate tends to be higher. The link is weak: +0.31 across 2,276 counties, on a scale from −1 (opposite) to +1 (in step). That figure compares places with the same population density, income and education, so those differences can't explain it. It holds inside states too. Measured separately within each of 36 states, the middle value of the link is +0.66.

Holds after adjusting

Every place, plotted

One dot for each place reporting both measures. Hover over or tap a dot to see its name and values. The thin line is the straight line that best fits the dots. The bold line, shown for counties, is the link after adjusting for density, income and education. A dot far from the lines is a place that does not follow the pattern.

Loading every place…

What each measure is

Aggregate travel time to work

The total minutes all commuters together spend getting to work in a day.

Census ACS 5-year · ACS table B08013_001

Robbery rate

Robberies in the year, per 100,000 residents, from the FBI. A robbery is taking something from a person by force or by threat, such as a mugging. It counts only crimes reported to police or found by them, so crimes nobody reports are missing. For a state, the figure is the FBI's estimate, which fills in for police agencies that did not report. For a county, it is only what the agencies reported, and it is shown only where agencies that reported for all 12 months serve at least 90% of the people who live there.

FBI Uniform Crime Reporting program (Crime Data Explorer) · FBI Crime Data Explorer: states, estimated_crimes robbery; counties, Return A master file, actual offenses

Highest and lowest

Where each measure is highest and lowest among the places reporting both (2023), with the other measure beside it. This is shown for every size of place where both are published. Metro-area values are added up from their counties. A measure that cannot be added up across counties, such as a middle value (median), has no metro figure. Counts are shown per 1,000 residents, since raw totals would only list the largest places. Cities and towns and ZIP codes are shown where the Census survey or the CDC publishes them; most other sources stop at the county. They are shown for places of 5,000 residents or more, and only where the survey’s margin of error is small enough for the figure to be usable. The CDC publishes its health estimates for cities in a version adjusted for age, so places with older or younger people can be compared fairly, but not for ZIP codes.

Counties

By aggregate travel time to work

Aggregate travel time to work, per 1,000 residentsRobbery rate
Highest
Manassas Park city, VA19,79424.3
Charles County, MD18,88663.8
Cumberland County, VA18,6870.713
Surry County, VA18,53230.7
Morgan County, WV17,9000
Lowest
Wrangell City and Borough, AK2611.590
Cimarron County, OK2850.470
Jeff Davis County, TX2968.390
De Baca County, NM3338.6158.8
Petersburg Borough, AK3363.290

By robbery rate

Aggregate travel time to work, per 1,000 residentsRobbery rate
Highest
District of Columbia, DC11,727625
Baltimore city, MD11,512584
Alameda County, CA12,260371
San Francisco County, CA12,858361
Philadelphia County, PA12,219339
Lowest
Washington County, CO8378.800
San Miguel County, CO8030.150
Saguache County, CO7864.380
Phillips County, CO8454.690
Moffat County, CO9805.400
States

By aggregate travel time to work

Aggregate travel time to work, per 1,000 residentsRobbery rate
Highest
New York13,393105
Maryland13,114131
New Jersey12,87052.1
Massachusetts12,57337.5
New Hampshire11,97316.6
Lowest
South Dakota8052.5420.6
Montana8161.7524.2
Wyoming8262.7211.6
Alaska8510.9677.7
North Dakota8665.9525.1

By robbery rate

Aggregate travel time to work, per 1,000 residentsRobbery rate
Highest
District of Columbia11,727607
Maryland13,114131
California11,447128
Illinois11,695110
New York13,393105
Lowest
Idaho8844.879.39
West Virginia9995.1811.4
Wyoming8262.7211.6
Maine10,25711.7
Vermont10,19714.6
Metro areas

By aggregate travel time to work

Aggregate travel time to work, per 1,000 residentsRobbery rate
Highest
East Stroudsburg, PA16,25613.7
Hemlock Farms, PA16,0970
Lake of the Woods, VA15,05210.3
Lexington Park, MD15,00518.2
New York-Newark-Jersey City, NY-NJ14,90036.6
Lowest
Wildwood-The Villages, FL4784.755.1
Baker City, OR5634.460
Mountain Home, AR5735.980
Susanville, CA5736.8138.1
Altus, OK5896.474.08

By robbery rate

Aggregate travel time to work, per 1,000 residentsRobbery rate
Highest
San Francisco-Oakland-Fremont, CA12,675235
Memphis, TN-MS-AR10,234234
Stockton-Lodi, CA13,007194
Philadelphia-Camden-Wilmington, PA-NJ-DE-MD11,835178
Pueblo, CO8441.05166
Lowest
Zapata, TX7773.730
Yankton, SD6865.670
Waterloo-Cedar Falls, IA7791.300
Warren, PA8624.510
Urbana, OH11,4800
Cities and towns — Robbery rate is not published for cities and towns

By aggregate travel time to work

Aggregate travel time to work, per 1,000 residentsRobbery rate
Highest
Stroudsburg borough, PA22,655—
Lake Holiday CDP, IL21,994—
Kingston CDP, MA21,883—
Rancho Calaveras CDP, CA20,583—
Elmont CDP, NY20,308—
Lowest
Binghamton University CDP, NY1298.95—
The Villages CDP, FL1621.28—
Pelican Bay CDP, FL1659.32—
Sun City West CDP, AZ2114.39—
Desert Palms CDP, CA2198.71—
ZIP codes — Robbery rate is not published for ZIP codes

By aggregate travel time to work

Aggregate travel time to work, per 1,000 residentsRobbery rate
Highest
ZIP 76073 (Wise County, TX)26,422—
ZIP 07462 (Sussex County, NJ)24,304—
ZIP 18328 (Pike County, PA)23,813—
ZIP 18302 (Monroe County, PA)22,783—
ZIP 92136 (San Diego city, CA)22,551—
Lowest
ZIP 71643 (Lincoln County, AR)1063.73—
ZIP 38677 (University CDP, MS)1071.71—
ZIP 13902 (Binghamton University CDP, NY)1298.95—
ZIP 32612 (Gainesville city, FL)1353.22—
ZIP 32162 (The Villages CDP, FL)1460.97—

Counties furthest from the pattern

Compared with the straight line that best fits all 2,283 counties: the five with far more robbery rate than their aggregate travel time to work would suggest, and the five with far less.

Aggregate travel time to work, per 1,000 residentsRobbery rate
Above the line
District of Columbia, DC11,727625
Baltimore city, MD11,512584
Alameda County, CA12,260371
San Francisco County, CA12,858361
Philadelphia County, PA12,219339
Below the line
Cumberland County, VA18,6870.713
Morgan County, WV17,9000
Currituck County, NC16,8780
Pike County, PA16,5170
Gates County, NC16,4310

Two series, one county

Both measures over time for a county you pick. The two charts are stacked, so they share only the years along the bottom. You can pick from the thirty largest counties reporting both. This panel covers 2010–2024, and a measure published only once shows as a single dot.

Loading…

Every version of the link

Each row measures the same link, from −1 to +1, in a different way. If the rows mostly agree, the link does not depend on one choice of method.

Before adjusting for anything+0.4382,276 counties reporting both
After adjusting for density, income and education+0.313the part of the link that is not just how urban, rich and educated a place is
Also adjusting for population size+0.259size taken out as well as density
Also comparing only within each state+0.258each county is compared only with others in its own state, so this is no longer a comparison between states
Giving bigger counties more weight+0.334the adjusted link for the average resident rather than the average county. With this weighting, the data counts for about 227 equally weighted counties
Middle value inside single states+0.662the link worked out inside each of 36 states with at least 20 counties reporting
Using ranks, after adjusting+0.362uses each county’s rank, not its value, so a few extreme counties cannot create the link

How much to believe it

Could it be chance?

The p-value is the chance of seeing a link this strong if there were really none. A value of 0.05 or less means the link is unlikely to be chance. Very small values are written in short form: 3.1e-16 means 0.00000000000000031, and the bigger the number after “e-”, the smaller the value. Treating every county as a separate case gives p = 6.0e-53. But counties in the same state tend to resemble each other, so the better figure allows for that: p = 5.1e-6. The site tested 29,403 pairs, and testing so many turns up some flukes. The q-value allows for that too. For this pair it is 4.0e-52.

Do nearby places look alike?

Moran’s I measures how much nearby places look alike: 0 means no map pattern, and higher means neighbours are more similar. For the part of each county that the adjustment leaves unexplained, it is +0.21 (p = 0.001). That unexplained part still clusters on the map. So some regional factor shared by both measures is not accounted for.

Did they change together?

The figures above compare counties at one moment. This asks a different question: where aggregate travel time to work rose most, did robbery ratemove too? Each county’s change is compared with the average change in its own state. That takes out ups and downs that hit a whole region at once. Each change is the gap between two estimates that both contain some error. That error pulls these links towards zero, so a weak one is weak partly for that reason. The q column shows whether a link could be a fluke, allowing for the many pairs tested: 0.05 or less means it is unlikely to be chance.

PeriodCountiesChange togetherWithin statesq
2014–2019 the main test: each Census survey figure averages five years, and these two do not overlap; before the pandemic2,019-0.06-0.020.476
2019–2023 a repeat check: its two five-year survey figures both include 2019, and it covers the COVID years1,879-0.01+0.000.983

Over the main period, any link between the changes could easily be chance. How change is measured.

Related pairs

Association only. Nothing here shows that either measure changes the other. This describes counties, not the people in them. Two measures going together across places does not mean the same people have both. How the US county data works · Explore Aggregate travel time to work and Robbery rate